|lightburn error 18||0.27||0.7||3221||19|
Error:5 This means that LightBurn sent the command to the controller to home it, but the controller does not have homing enabled or configured. The most likely reason for this is that the machine does not have homing switches, and you turned on 'Auto-home on startup' in the device settings.What is Lightburn?
LightBurn is a native application written for Windows, Mac OS, and Linux. LightBurn talks directly to your laser, without the use of additional software. We currently support most Ruida, Trocen, TopWisdom, and GCode based controllers. Supported GCode controllers,include Grbl, Smoothieware, Grbl-LPC, and Marlin.Why won't my PC turn on the Lightburn?
The most likely reason for this is that the machine does not have homing switches, and you turned on 'Auto-home on startup' in the device settings. If you are getting the 'Busy' bar in LightBurn, but the machine does not move, make sure you are actually connected to the controller.What are the internal error codes for grbl Lightburn?
GRBL has a number of different internal error codes that you might see when using LightBurn. These are the most common: ALARM:2 You are trying to send the machine outside of its known working area, and GRBL has prevented this in order to prevent damage to the machine.